I’ve never really wanted to delve into the realm of pneumatic props because it’s always seemed like such a difficult process.  Well, Mortarlover123 (aka TangoAlphaCharlie1) seems to think that it’s a pretty easy endeavor, and after watching his tutorial on the basics, I think I’m inclined to agree.  His tutorial only really covers some basic concepts, but it’s more than what I need to feel confident enough to make the leap into this realm of prop making.  Let’s face it, sometimes a wiper motor isn’t going to give you the push you need for your props, and a pneumatic solution may be what you need.  If that’s the case, this tutorial might be the answer if you’re on the fence about getting into pneumatic props.   http://youtu.be/qtmpYSzprO8 Shop These Materials on Amazon 1/4" NPT Solenoid Valve DC12V 5-Way Double-Acting Pneumatic Air Cylinder 40mm x 100mm 1/4" OD Push-to-Connect Pneumatic Fittings Kit 40-Piece Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

There are numerous tutorials on how to make cemetery fence so it stands to reason that there would be multiple tutorials on how to make cemetery columns, and Camsauce from HalloweenForum has a highly detailed tutorial on how to easily build some really realistic looking columns. These columns are solidly built around a 2 x 2″ lumber and OSB / Plywood base.  The joint compound is spread around the entire structure to create the stone facade, which is easy to do and looks great.  Once you’ve got your joint compound spread you’re ready to black wash the columns to suit your taste.  It’s really that simple, and the finished product couldn’t look any more realistic without a trowel! Camsauce’s tutorial includes some optional skeletal sconces, which seem like a lot of extra work, but judging from the photo below are well worth the time and effort. Items needed to complete this include: 2 x 2″ (approx 85′) 2 x 4 (approx 16′) 2 x 6 (approx 14′) 5 sheets 4 x 8′ OSB board (or plywood) 2 sheets 2″ Styrofoam insulation 2 gallons joint compound Exterior primer Acylic paints to black wash   Optional items: Moss Skeletons Candles   Shop These Materials on Amazon 5-Pack Foam RIP Tombstone Blanks for Carving Decorative Cemetery Fence Sections Rust-Oleum Flat Black Spray Paint 12oz Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

Every home deserves an over sized spider hanging around on the roof, and if you can blow up a balloon you might just be able to create your own. Dano from Dano’s Spider House has a tutorial on how to create some really good looking paper mache spiders that are worthy of any haunt.   The good news is they’re easy to create and you can make them as large as you want since all of the parts used are sizable based on your needs.  It”ll help if you’ve got some experience creating with paper mache, but even if you don’t you should still be able to create these awesome arachnids.  Dano’s even got a great single bodied option using PVC legs that’s worth trying as well!   Items needed to complete this include: Balloons Water Flour PVC connectors Foam pipe insulation Indoor/Outdoor lights Plastic semi-transparent ball Black tempera paint Waterproof sealer Coffee grounds for texture (optional) Shop These Materials on Amazon Instant Paper Mache Powder Mix 3.3 lbs Assorted 12" Latex Balloons 120-Pack 1" Schedule 40 PVC Pipe 6-Pack Ratcheting PVC Pipe Cutter (up to 1-1/4") 1" PVC Furniture Fittings Assortment 12-Pack Oatey PVC Clear Cement + Primer Handy Pack 300 Sq Ft Stretch Spider Web with 20 Fake Spiders Giant 295" Fake Spider + Triangular Web Black Braided Fishing Line (for rigging props) Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

Since many of the prop builds featured on HauntersList involve PVC frames it’s probably not a bad idea to post another tutorial on how to create hands for those frames.  LastHouse from HalloweenForum has a tutorial on how to make some gruesome looking skeletal hands that won’t take you too long and the cost is next to nothing. They’re made of styrofoam and wood dowels coated with a little hot glue and then painted.  The hardest part about this tutorial is melting the styrofoam to give them a more natural boney look.  Make sure to do this step in a well ventilated area as burning styrofoam can be highly toxic (it’s a good idea to wear a respirator).   Items needed to complete this include: Styrofoam Hot Glue Wooden dowels Drylock Paint   Shop These Materials on Amazon 1" Schedule 40 PVC Pipe 6-Pack Ratcheting PVC Pipe Cutter (up to 1-1/4") 1" PVC Furniture Fittings Assortment 12-Pack Oatey PVC Clear Cement + Primer Handy Pack XPS Foam Board 1" Thick Craft Sheets 4-Pack 4-in-1 Hot Wire Foam Cutter Kit 15W Loctite Power Grab Foam-Safe Construction Adhesive Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

Making a prop from scratch takes skill, but aging the prop so that it looks like it’s been around for a few years takes talent.  Now, it’s well known that Terra from HalloweenForum can build anything.  I mean, I honestly think she could build a structurally sound house out of styrofoam if she wanted to.  But when she needs to make something look old, or grunged up, she’s definitely got the talent to make it so.  Her video tutorial on how to Grime Up Props details exactly how she does it, and it’s the perfect guide for anyone who needs help making props look and feel like they’ve been around for years.  ...

If you’re a fan of projection effects then you should definitely check out Mr. Chicken’s Haunted Tombstones.  All you’ll need is the projector of your choice and a piece of styrofoam to carve your blank tombstone.  Oh, and of course, you’ll need to purchase the video files for the Haunted Tombstone Projections. You can purchase either the short tombstone or the taller tombstone, or as a set to be projected side by side.  The download includes four video files allowing for standard definition or high definition playback in either portrait or landscape orientations, all in .MP4 format. It’s a pretty easy effect to pull off, especially considering the tombstone that you carve for it will be custom sized to the projection, and at $25 apiece ($50 for the set), you can’t go wrong.        ...

Dave Lowe is an incredibly talented artist and one heck of a prop builder, and If you’ve never checked out his Para Abnormal web comics, do not wait any longer, because there’s a pretty good chance that you’re going to love them. Anyway, he’s got a quick little tutorial on how he built his moving eye portrait.  Of course, it really helps if you have your own art that you can enlarge to start with (I honestly think that if I had Dave’s artistic abilities I’d probably fill an entire room with moving eye portraits).     The prop build is pretty straight forward.  Once you have your favorite portrait enlarged, just cut out the eye sockets and glue two ping pong ball halves on the back (concave so they have some depth).  Dave utilized green craft crystals for the iris which added a little sparkle to his portrait, but you could always just print one. That’s all there is to it, but this prop is definitely a crowd pleaser, and well worth the time it takes to create (especially if it turns out as good looking as...

I never got to see Jeff Baird’s Leering skeleton prop tutorial, but I have seen the video of his prop in action (it comes around 1:30 mark in the video below) and it looks great.     So when I found the tutorial that SpiderFreak of SpyderWood had created based on Jeff’s prop with a full surround of the motor mechanism I knew that it needed to be featured on HauntersList.  I love seeing certain prop builds get modified and improved upon in the process, and the fact that you can’t see the mechanics of this prop when viewing it from behind is certainly an upgrade.     I am purposely not including an items list on this tutorial because the tutorial does not really detail the lengths sufficiently enough for me to approximate them. Shop These Materials on Amazon 12V Wiper Motor 2.5" Shaft 110 Degree (prop building) PWM DC Motor Speed Controller 9-70V 35A 45Kg High-Torque Waterproof Digital Servo Motor Realistic Replica Human Skull Statue 6.5" 5.4ft Full Size Halloween Foam Skeleton Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

If you’re looking for an effective and inexpensive way to give your haunt some extreme distressing then you may want to check out the tutorial that Marcus132 posted over at HauntForum.  His tutorial utilizes wood grain shelf paper       and a little bit of paint shadowing to create a faux wood lathe look.     From there, it’s just cut into cracked hole shapes an applied to the drywall.  This project is just another great example of how you can sometimes get great results without having to follow long and tedious...

If you’re a veteran prop builder you’re no doubt familiar with how to mix monster mud.  But for those that have never had the pleasure of mixing a batch and slopping a handful on their latest prop, well what are you waiting for?  And since most tutorials reference monster mud with no additional details, I figured it would probably be a good idea to provide a tutorial from TwistedVisions on how to mix Monster Mud for the uninitiated.  It is quite literally, the easiest thing I’ve ever posted on HauntersList and should be considered mandatory reading.       Shop These Materials on Amazon USG Sheetrock Drywall Joint Compound 4.5 Gallon Cheesecloth Unbleached 36×36" (for Monster Mud draping) Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

I’ve always wanted to build an Axworthy Flying Ghost for a haunt.  Unfortunately the spacing of the trees in my yard would make for a ridiculously long run for it so it’s never really been an option to attempt it.  That may be a good thing, though, if you ask Joseph Keller, a.k.a Mr. Macabre.  His short video tutorial on the pros and cons of building one is definitely worth watching and you do get some insight into how this prop is built.   http://youtu.be/pG2s2fH0SiQ Shop These Materials on Amazon 12V Wiper Motor 2.5" Shaft 110 Degree (prop building) PWM DC Motor Speed Controller 9-70V 35A 45Kg High-Torque Waterproof Digital Servo Motor Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

Some props are big and some props are larger than life.  Rania Peet’s Build of a Giant Pumpkin tutorial falls into the “larger than life” category.  I’m not even sure I would want to attempt to duplicate this, I’m pretty content to just revel in its awesomeness.  This Giant Pumpkinhead Scarecrow that she built for her Haunted Garden measures in at an impressive 18-feet tall and breathes fog.  That’s not just a little too cool, now, is it?     If you’ve got some prop building skills you should be good to go with this tutorial as it’s a pretty straightforward build.  The Pumpkin is constructed using Great Stuff sprayed over a chicken wire frame.  The threaded rods are wrapped in chicken wire to help give the pumpkin its shape before the Great Stuff is sprayed on.     The hat was updated on July 26th, 2013 and is now made of chicken wire with tension wire wrapped around it and tension rods to support it.  The frame is then wrapped with landscape fabric with burlap applied to give it a more seasoned look.       The chilled fog is pumped in through the back of the Pumpkin’s head and should be considered mandatory if you are going to attempt this prop because it looks incredible.   Items needed to complete this include: PumpkinHead 2×2 wood Flat pieces of wood for bases 1/4″ threaded rods Wing nuts for rods 1″ Galvanized Chicken wire Stainless Steel Screw Eye Tie Line/Rope Cheesecloth A ton of Great Stuff Spray Foam Protective Eyewear/goggles Protective Mask White Spandex Burlap Hat 1″ and 2″ rolls of Galvanized Chicken Wire Galvanized Steel Chain Link Fence tension wire Galvanized Steel Chain Link Fence Tension Bars Zip Ties Craft wire Black Craft Fabric/Landscape Fabric...

If you want a really good looking fence for your cemetery but don’t want to go through the heavy detail of the Faux Wrought Iron Fence tutorial, then have no fear, you can get a great effect for just pennies on the dollar if you follow this tutorial from the old abandoned Haunter’s Hangout.  The fence is made of 1/2″ PVC and 1×2″ lumber, but you crown the top of it with the fancy garden fence that is available at WalMart, or most home improvement stores.     After antiquing the fence a bit it looks fantastic, and the time you’ve saved in not adding the detail from the Faux Wrought Iron Fence tutorial can be better spent on other endeavors.     Items needed to complete this include, but should be measured per section: 1×2″ Lumber 1/2″ PVC Decorative garden fence Black spray paint Brown craft paint Sponge   Shop These Materials on Amazon 5-Pack Foam RIP Tombstone Blanks for Carving Decorative Cemetery Fence Sections Rust-Oleum Flat Black Spray Paint 12oz 1" Schedule 40 PVC Pipe 6-Pack Ratcheting PVC Pipe Cutter (up to 1-1/4") 1" PVC Furniture Fittings Assortment 12-Pack Oatey PVC Clear Cement + Primer Handy Pack Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

If you’re interested in creating your very own ankle tickler then take a look at Operatingnurse’s tutorial.  She’s given us everything we need to know to create this unsettling effect for our own haunts.  I will openly admit that this effect drives me absolutely nuts, I can’t stand it….but I can guarantee you that I will not hesitate to build my own in an effort to pay it forward!     Items needed to complete this include: 4′ – 1/2″ PVC (2) – 1/2″ PVC end caps 2 Way Solenoid Valve Push Quick Male Connector Super Strong Quick Setting Epoxy Soft tubing and connectors – about 14″ Flat black spray paint Shop These Materials on Amazon 1/4" NPT Solenoid Valve DC12V 5-Way Double-Acting Pneumatic Air Cylinder 40mm x 100mm 1/4" OD Push-to-Connect Pneumatic Fittings Kit 40-Piece 1" Schedule 40 PVC Pipe 6-Pack Ratcheting PVC Pipe Cutter (up to 1-1/4") 1" PVC Furniture Fittings Assortment 12-Pack Oatey PVC Clear Cement + Primer Handy Pack Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

I love it when you set out to build a prop a certain way and a better prop or process reveals itself to you along the way. That very scenario happened to SpyderWood when he saw a grossly overpriced Winged Reaper prop and decided to alter the course of an existing prop and build his own version. His Winged Reaper tutorial marries a Bucky skull to a Blucky torso and throws in a variety of Bucky bones for the wings. The build originally utilized the whole Blucky, but as the project progressed he realized that he’d only need the top half. With the robe covering the reaper, though, you may not even need much more than the Skull!     The tricky part with this prop is obviously the wings, but if you can get the Bucky bones screwed together so they can hold the weight of the cheesecloth, the results will be spectacular.   Items needed to create this include but are not limited to: 1 Blucky Skeleton 1 Bucky skull 10 to 12 assorted Bucky bones Cheesecloth Latex (for wings) 3′ – 2×4 wood 6′ – 2″ PVC Shop These Materials on Amazon Instant Paper Mache Powder Mix 3.3 lbs Assorted 12" Latex Balloons 120-Pack Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

The crew over at Spectral Illusions is at it again adding four new video effects to their lineup for 2013.  These four great new videos are priced at an affordable $20 to $30 apiece and are offered in both high definition (1920×1080) and standard definition  (720×480) formats as QuickTime movies. Intended for use with a projector, flat panel monitor, or with a scrim or reflective surface for a great Pepper’s Ghost effect, they’re a welcome addition to an already great lineup of videos.      ...

What was it that Dr Kreepy said?  “A home haunt without skulls is like a cake without icing”?  Well what if I like a whole lotta icing?  I’m a big proponent of saving money, and the less money I have to pay for a quality prop the better.  Bearing that in mind, I don’t think that you can get more cost effective than this tutorial, especially if you have little kids running around your house.  You see, we go through milk in my house like they’re giving it away on street corners.  And being a good eco-friendly household, we’ve recycled all of our containers.  But now that I’ve seen this cool tutorial that Mystang posted on the HauntForum, I realize that for every empty gallon of milk I’ve recycled, I may as well have chucked a skull in the trash.  And I would never throw a skull in the trash.  So if you like drinking milk and saving money on your haunt props, check out Mystang’s video tutorials on how to make Milk Jug Skulls.         http://youtu.be/Os1Wj-VeYvA Shop These Materials on Amazon Realistic Replica Human Skull Statue 6.5" 5.4ft Full Size Halloween Foam Skeleton Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

The great thing about the haunting community is that when someone is struggling with an idea for a prop build there is usually someone around that has a solution, or an alternate method to accomplish the same idea.  Such is the case with TK421’s solution to the question of how to make glass look broken posed at HalloweenForum.     And while TK421’s solution wasn’t the only idea provided (and there were several offered), it does look to be the best.  It’s very easy to do actually, utilizing frosted contact paper cut to look like cracked glass and applied to the window.  The results look great....