Some tutorials are harder to write about than others.  This is not one of those.  The tutorial that the guys over at Master Fog have created for their Fog Chiller is perfect.  I can’t believe that I’ve already wasted this many words setting this wonderful tutorial up, but if you’re in the market to make a huge low lying fog chiller, then look no further, the instructions are below.  Oh, and be sure to stock up on plenty of Master Fog’s Ground Clouds or Creepin’ Fog juice .     Items needed to complete this include: 30 gallon trash bin Power Drill 4″ hole saw (or utility knife) 4″ pvc Y fitting Small fan 20′ ducting Duct vent Duct tape Ffog machine Low lying fog fluid     Shop These Materials on Amazon 400W Fog Machine with Wireless & Wired Remote FogWorx Extreme High Density Fog Juice Gallon Copper Coil Refrigeration Tubing 1/8" OD x 6.5ft (fog chiller) Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

Serialc0d3 over at HalloweenForum.com has a great tutorial on how to build your own Vortex Fog Chiller for very little cash.  Now, there are many containers you can use when building your own vortex fog chiller, but reusing a Tidy Cat Litter pail is the ultimate “green” project.  Additionally, the finished product looks remarkably familiar.       To complete this prop you’ll need the following:   Tidy Cat Litter Pail Few ft of 2 in. PVC 2 in. PVC Elbow Few ft of 1/2 in. PVC pipe Some sort of metal mesh or chicken wire to hold ice Epoxy of your choice (I used Oatey Epoxy Putty) Krylon Fusion Paint (optional) Nozzle for Drain Hose (optional) Drain Hose (optional) Tools for cutting the materials And of course, you’ll need a fog machine. Shop These Materials on Amazon 400W Fog Machine with Wireless & Wired Remote FogWorx Extreme High Density Fog Juice Gallon Copper Coil Refrigeration Tubing 1/8" OD x 6.5ft (fog chiller) Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...

  Fog machines operate by moving fog juice into a temperature controlled heat exchanger that vaporizes the fluid and produces the fog.  Since heat rises, the fog that is produced usually ends up hanging anywhere from the top of the fog machine to the top of the ceiling.  I’m convinced that anyone who’s ever purchased a fog machine had dreams of an entirely different effect with the fog hanging low to the ground creating that creepy looking mist that Hollywood has spoiled us with. The solution of course (short of utilizing dry ice) is to chill the fog before it is emitted, and Froggy’s Fog has just the solution with their Cold Fusion Vortex Fog Chiller.  This beauty stands just 19″ off the ground and is capable of holding up to 20 pounds of ice.  You WILL need to provide your own fog machine for this to work, then just set it so that the fog emitted enters the opening on the Cold Fusion unit.  The fog will be cooled as it passes through the Cold Fusion unit until it is emitted as chilled fog!  Simple and effective.       Shop These Materials on Amazon 400W Fog Machine with Wireless & Wired Remote FogWorx Extreme High Density Fog Juice Gallon Copper Coil Refrigeration Tubing 1/8" OD x 6.5ft (fog chiller) Affiliate Disclosure: HauntersList.com is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate we earn from qualifying purchases at no extra cost to...