Foam Barrels

Ok, since September 19th was International Talk Like a Pirate Day, (and I was completely unaware of this fact), I thought I’d post the tutorial that fravak from HalloweenForum penned on how to make foam barrels.  The barrels are crafted using styrofoam blocks, the kind that are used to stack small flatbed trailers, and while these may be hard to come by, even if you don’t need barrels and have access to these, they are gold, take them. Since the foam blocks start out square, fravak utilized the lid from a 5-gallon bucket to outline the round shape you’ll need.  From there the corners were cut off using a hot wire cutter and the entire block was sanded down using a drywall rasp to round it out.  Once this is complete the detailing of the barrel will actually begin.  A soldering iron will be needed to carve out the individual pieces of wood on all sides of the barrel.   Once this is complete you can add some finer detail by adding graining to all the wood planks with the soldering iron.  Fravak utilized paper mache for the straps around the barrels and a piece of blue foam for the plug.   Once all of these steps are complete it’s time to paint it up.  The base is a browish color while the top he top is covered with a black wash that fravak rubbed all over the barrel to make the color more uneven. The end result is phenomenal, these barrels look completely realistic they don’t cost much, and they’re light as a feather.  So next International Talk Like a Pirate Day, don’t forget to grab one of your barrels as you strut around town saying “Ahoy, me hearties, let’s see what crawled out of the bung hole.”, it’ll just make a lot more...