Vent Motor Headpopper...

If you’ve ever wanted a headpopper prop in your haunt but didn’t think that a wiper/vent motor would create a good enough effect?  Relax, Dave the Dead has a really good tutorial over at HauntForum on how to create your own headpopper.  What I like best about this one is that as the head peeks over the tombstone it slowly rotates its way from side to side.  This makes for a much creepier effect than just a popup / popdown.   [iframe src=”http://vid105.photobucket.com/player.swf?file=http://vid105.photobucket.com/albums/m240/davethedead/headpopper%20prop/headpopperprop.flv&sr=1″ width=”425″ height=”350″]   Items needed for this prop include: 16″ square of 1/2 inch plywood, cut in half (two 8″ X 16″ pieces) 20″ long 1″ X 4″ wood slat 1/8 X 1/2″ aluminum bar stock, cut into 5″ and 25″ lengths 3/8″ X 4-1/2 inch lag Screw Eye (2) 1/4-20 X 1.5″ Bolts (3) 1/4-20 Nuts (2) 1/4″ lock washers (1) 1/4-20 locking nut (2) 1 1/2″ wood screws Motor 12Vdc...


STILL NOT SURE WHAT TO DO?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

Form is not available. Please visit our contact page.
X
CONTACT US