If you’re interested in creating your very own ankle tickler then take a look at Operatingnurse’s tutorial.  She’s given us everything we need to know to create this unsettling effect for our own haunts.  I will openly admit that this effect drives me absolutely nuts, I can’t stand it….but I can guarantee you that I will not hesitate to build my own in an effort to pay it forward!     Items needed to complete this include: 4′ – 1/2″ PVC (2) – 1/2″ PVC end caps 2 Way Solenoid Valve Push Quick Male Connector Super Strong Quick Setting Epoxy Soft tubing and connectors – about 14″ Flat black spray...

Mourning Cemetery & Manor have a really good tutorial on how to build a bleeding tombstone.  The trick to this one involves two plexiglass blood tanks, the main tank is mounted in the styrofoam base and a secondary tank is mounted above the bullet holes.     A 1/2″  tube feeds the blood from the main tank to the secondary tank, while 1/4″ tubes drain the blood down into the bullet holes.  This setup allows for the blood to slowly seep out of the holes rather than flowing out at an unnatural rate.   Items needed to complete this include: 1/4″ Plexiglass tanks (width determined by tombstone) water pump (1) 1/2″ tubing (5) 1/4″ tubes Plexiglass squares Styrofoam...