There are numerous tutorials on how to make cemetery fence so it stands to reason that there would be multiple tutorials on how to make cemetery columns, and Camsauce from HalloweenForum has a highly detailed tutorial on how to easily build some really realistic looking columns. These columns are solidly built around a 2 x 2″ lumber and OSB / Plywood base. The joint compound is spread around the entire structure to create the stone facade, which is easy to do and looks great. Once you’ve got your joint compound spread you’re ready to black wash the columns to suit your taste. It’s really that simple, and the finished product couldn’t look any more realistic without a trowel! Camsauce’s tutorial includes some optional skeletal sconces, which seem like a lot of extra work, but judging from the photo below are well worth the time and effort. Items needed to complete this include: 2 x 2″ (approx 85′) 2 x 4 (approx 16′) 2 x 6 (approx 14′) 5 sheets 4 x 8′ OSB board (or plywood) 2 sheets 2″ Styrofoam insulation 2 gallons joint compound Exterior primer Acylic paints to black wash Optional items: Moss Skeletons Candles...
Simple Fancy Fence
posted by Tony
If you want a really good looking fence for your cemetery but don’t want to go through the heavy detail of the Faux Wrought Iron Fence tutorial, then have no fear, you can get a great effect for just pennies on the dollar if you follow this tutorial from the old abandoned Haunter’s Hangout. The fence is made of 1/2″ PVC and 1×2″ lumber, but you crown the top of it with the fancy garden fence that is available at WalMart, or most home improvement stores. After antiquing the fence a bit it looks fantastic, and the time you’ve saved in not adding the detail from the Faux Wrought Iron Fence tutorial can be better spent on other endeavors. Items needed to complete this include, but should be measured per section: 1×2″ Lumber 1/2″ PVC Decorative garden fence Black spray paint Brown craft paint Sponge...
Faux Wrought Iron Fence...
posted by Tony
Ok, so we all know there are about 1,000 tutorials on the web about how to build a fence for a graveyard. Most of them use the typical 1 x 2″ furring strips at the top and bottom with PVC creating the bars of the fence. Well, Scott A. Stoll has definitely taken it up a notch, and if I was going to pick a tutorial to follow to make my own cemetery fence, I would choose his method. His tutorial on how to build his fencing is incredibly detailed, and the resulting product is well worth the time spent because it is remarkably realistic looking. This could pass for a real fence. The finials and curved iron is also incredibly easy to implement and adds so much to this fence. The best part is that you won’t have to worry about running out of finials, or heating up the PVC to accomplish this because it’s done using craft foam! If you are thinking of making some cemetery fence, you would be well served to check out this tutorial, it is the real deal. Items used to create fencing include: 1×2″ lumber 1/2″ PVC Craft Foam Drywall screws Hot...